What is a Pool Pump, Pool Motor?

A pool without a pump turns into a dirty environment shortly after the water is filled. Since there is no ornamental pool pump, bacteria and dirt accumulate in the pool.

Afterwards, it turns the pool from a healthy living place into a favorable environment for the reproduction of diseases. To avoid this situation, it is absolutely necessary to use a pool circulation pump in pools.

To remove dirt and insects from the pool, pools need a pool water pump for better distribution of chemicals to fight bacteria.

Pool water pump, mini pool pump selection keeps the water of the pool clean by passing it through the sand filter. In circulation pumps, the pump motor should be self-priming.

What is a Pool Pump?

Pool pumps are pumps that provide circulation in the pool. It sucks the water and purifies the water from unwanted substances such as insects, leaves and branches through the filters in its mouth.

At the same time, it ensures that the pool chemicals and chlorine used against bacteria are evenly distributed in the water as it constantly circulates the water.

The heart of the pool system is the water pump. More technically speaking, in a typical pump system, an electric motor turns an impeller inside the pump housing. The impeller filters the water through various channels and returns it to the water inlets.

How Often Should I Run the Pool Pump?

To decide this, you first need to be sure of the frequency of use of the pool. If you use the pool frequently and with a lot of people, you can run it more often, if you use it infrequently and with few people, you can run it less often.

Another issue is the capacity of your cavity. For 24 hours, it is recommended to work on average 4 hours and take a break.

Things to Consider When Buying Your Pool Pump

First of all, it is necessary to determine the filter capacity needed to make a decision.

For example, suppose you have a swimming pool that is 10 m long and 5 m wide. The total depth of the pool is 1.5 m. This results in a total volume of 75 m³ of water.

To filter this swimming pool in 4 hours, you will need a pool pump that can lift a minimum of 18.75 m³/h.

You can choose to save money on your filter installation by choosing a filter pump with a capacity of 13 m³/h and a filter with a capacity of 14 m³/h.

In summer, we recommend a minimum of 12 hours a day, with a maximum break of 2 hours. This is 4 hours of filtering followed by a 2-hour break and then repeating continuously.

This way you will need far fewer chemicals and you will always have a clear swimming pool.

If you want to buy a pool pump for your pool, you can reach the leading brands from Kampa Company and get support in finding the most suitable pump for your pool with our technical staff. Click here for detailed information about pumps. Click here to review pool pump prices.