Pressure switches <\/strong>are a part used for automatic operation of pumps according to pressure. It is the most important part used to make the pump a booster. As you know, in mechanical pressure switches, pressure can be adjusted mechanically with a wrench and screwdriver.<\/p>\n\n\n\nIt is necessary to test whether the engine has reached the pressure we want by running the engine at each setting, that is, you need to test over and over again to reach the desired pressure setting. And this process can only be done by those who understand this business and at the same time it is a waste of effort and time.<\/p>\n\n\n\n
In the digital pressure switch<\/strong>, we can adjust the on and off pressure of the engine in seconds with the buttons on the product in a very fast and practical way, and at the same time, you do not need to use an extra pressure gauge as the pressure is also displayed on the screen.<\/p>\n\n\n\n\nIt shows the working pressure of<\/em> the booster on the digital display on the product. Since you can see the current pressure of the booster digitally, you do not need to use an extra pressure gauge in your booster.<\/strong>\nThe settings are made from the 4 buttons you can see in the picture on the digital pressure switch.<\/strong><\/figcaption><\/figure>\n\n\n\n\nH<\/strong> button is used to adjust the top shutdown pressure of the booster. If you want your booster to shut off at which bar, it is enough to bring it to that pressure on the upper and lower buttons.<\/li>\n\n\n\nL<\/strong> button is used to adjust the lower activation pressure of the booster. At what bar you want your booster to be activated, it is enough to bring it to that pressure from the upper and lower buttons.<\/li>\n\n\n\nWhen you press and hold the buttons 1<\/strong> and 2<\/strong> for 3 seconds at the same time, the n03 value is output, which means that when the pump reaches the set pressure, it waits 3 seconds and operates. You can increase or decrease this time delay according to your needs by using the buttons 2 and 3.<\/li>\n\n\n\nAfter 3 seconds of inactivity on the setting screen, it saves the current settings and exits the screen.<\/li>\n\n\n\n Turning Dry Run Protection on and off. Dry run is switched on in the factory settings. If the motor operates at a pressure lower than<\/strong> the lower switch-on pressure<\/strong> you set via the pressure switch, it protects the motor after 2 minutes.<\/li>\n\n\n\nWhen you press and hold 2 <\/strong>and 4 <\/strong>buttons at the same time, you will see F01 <\/strong>or F00 <\/strong>. In F01 position, dry run protection is active. When buttons 2 and 4 are pressed and held again, the dry run protection is inactive in F00 position.<\/li>\n\n\n\nWhen the digital pressure switch protects the engine, the display shows error E-F<\/strong>. To reactivate it, simply press any button.<\/li>\n<\/ul>\n\n\n\n\n\nIn pressure measurement works of factories<\/li>\n\n\n\n Booster Boosters<\/li>\n\n\n\n In water treatment systems<\/li>\n\n\n\n Food sectors<\/li>\n\n\n\n In the chemical and pharmaceutical industry<\/li>\n\n\n\n Heating and cooling systems<\/li>\n\n\n\n Textile companies<\/li>\n\n\n\n On ships and yachts<\/li>\n<\/ul>\n\n\n\nDigital Pressure Switch Technical Specifications<\/h2>\n\n\n\n\nCan be used in motors up to 1.5 kw.<\/li>\n\n\n\n Adjustable between 0.1 bar and 10 bar<\/li>\n\n\n\n Fine adjustment at 0.1 bar level.<\/li>\n\n\n\n Can be used with 220 volt single-phase motors.<\/li>\n\n\n\n Can be used up to 10 amps.<\/li>\n\n\n\n It can be used with a contactor for 380 volts or different voltages.<\/li>\n\n\n\n Can be used up to 80 \u00baC temperature.<\/li>\n\n\n\n IP66 protection.<\/li>\n\n\n\n It has a life span of more than 20 million on-off cycles.<\/li>\n<\/ul>\n\n\n\nYou can watch our YouTube video to watch the detailed explanation and use of the Digital Pressure Switch<\/strong>. You can easily access the video with the link I left you.<\/p>\n\n\n\n