Tractor PTO Water Pump Review

The tractor PTO water pump is a water pump located at the rear of the tractor and powered by a rotating shaft using the power of the tractor.

These pumps can be used for agricultural irrigation, fire fighting, water transport, etc. The tractor PTO water pump has the ability to pump water up to about 90 meters.

Tractor PTO water pump prices vary according to factors such as brand, model, suction and discharge capacity.

Traktör Kuyruk Mili Su Pompası

1-Snail
2-Fan
3-Suction Cover
4-Wear Ring
5-Fan Nut
6-Mechanical Seal
7-Pump Shaft
8-Impeller Shaft
9-Gear Box Top Cover
10-Gear Box Housing
11-Impeller Gear
12-Pinion Gear
13-Whipper
14-Inner Ball Thrust Cover
15-Oil Seal
16-Bearing
17-Top Ball Thrust Cover
18-Outer Ball Thrust Cover

Tractor PTO Water Pump

Tractor PTO Water Pump Working Principle

In the PTO pump, the stage is lowered into the well and the rotational moment is transmitted with the help of shafts connected to each other in the pipe. In the PTO pump, it gets its energy from the tractor PTO. In the tractor PTO water pump, steel wound pipe is used.

Click here for prices of water pumps working with tractor PTO.

Beet Engine Selection

The choice of beetroot engine depends on factors such as the place where the beetroot water engine will be used, the source from which the water will be taken, the distance and height at which the water will be pumped, the irrigation method, the power and fuel consumption of the engine. Some points to be considered when choosing a beet engine are as follows:

  • Since the beetroot engine works together with the beetroot centrifugal pump, it is important to choose a motor suitable for the pump. The suction and discharge capacity, flow rate and pressure values of the pumps may be different. The required motor power also varies according to these values. For example, a 10 HP motor may be sufficient for a flow rate of 50 m3/h and a pressure of 40 mss.
  • A beetroot engine is an engine that usually runs on diesel fuel. The advantage of diesel fuel is that it is more economical and lasts longer. However, the disadvantage of diesel fuel is that it requires more maintenance and makes more noise.
  • Therefore, when choosing a beetroot engine, it is important to consider criteria such as fuel consumption, ease of maintenance and noise level.
  • Since the beetroot engine is used for agricultural irrigation, it is important that it is resistant to different climatic conditions. Beetroot engines can exhibit superior performances at temperatures between – 40 degrees and + 45 degrees.
  • In addition, the beet engine must also be protected against contaminants such as dust, sand and mud. Therefore, when choosing a beet engine, it is important to ensure that it has a quality and robust material structure.

What are Tanker Pumps?

Tanker pumps are pumps used for operations such as transporting, unloading or irrigating water with tankers. Tanker pumps are usually mounted on the back of vehicles such as tractors or trucks and operate using the vehicle’s power.

Tanker pumps can be of different types, capacities, pressure and power. When choosing a tanker pump, it is necessary to pay attention to factors such as the place where it will be used, the source from which the water will be taken, the distance and height at which the water will be pumped, the irrigation method, the power of the engine and fuel consumption.

Motorless Pump Features

A non-motorized pump is a type of pump that usually does not have its own engine and is used to draw water from water wells or deep places. A motorless pump is powered by different power sources such as atractor, truck or wind instead of electricity. A non-motorized pump can transport water at high pressure and high flow rates.

Advantages of Motorless Pump

  • It is not affected by power outages.
  • Low cost and maintenance free.
  • It is an environmentally friendly and energy efficient option.
  • Long lasting and durable.

Disadvantages of a Motorless Pump

  • It requires an extra power supply to operate.
  • It can be noisy and vibrating.
  • Sensitive to water quality and pollution.

When choosing a non-motorized pump, factors such as the place where it will be used, the source from which the water will be taken, the distance and height at which the water will be pumped, pumping capacity, engine power and fuel consumption should be considered. Non-motorized pump prices vary according to brand, model, feature and quality.

Click here for more detailed information about water pumps.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button